Resources for the Community

• Lovisa, A.C., Henderson, D.J., Ginger, J.D., and Walker, G (2016) Characterising fatigue macrocrack initiation in profiled steel roof cladding. Engineering Structures, 125.  pp.364-373.
• Satheeskumar, N., Henderson, D.J., Ginger, J.D., Humphreys, M.T., and Wang, C.H. (2016) Load sharing and structural response of roof-wall systems in a timber-framed house. Engineering Structures, 122.  pp.310-322.
• Satheeskumar, N., Henderson, D.J., Ginger, J.D., and Wang, C.H. (2016) Wind uplift strength capacity variation in roof-to-wall connections of timber-framed houses. Journal of Architectural Engineering, 22 (2).
• Konthesignhe, K.M., Chaminda, Stewart, Mark G., Ryan, Paraic, Ginger, John, and Henderson, David. (2015) Reliability based vulnerability modelling of metal-clad industrial buildings to extreme wind loading for cyclonic regions. journal of Wind Engineering and Industrial Aerodynamics, 147.  pp. 176-185.
• Lovisa, A.C., Henderson, D.J., Ginger, J.D. (2015) An inexpensive method for measuring deformation of corrugated cladding using close range photogrammetry. Experimental Mechanics, 55 (3).  pp 599-609
• Ginger, J., Henderson, D., Humphreys, M., Konthesignha, C. and Stewart, M.G. (2015) Wind loads on the frames of industrial buildings. Australian Journal of Structural Engineering, 16 (2).  p. 169-176.
• Smith, Daniel J., Masters, Forrest J., and Gurley, Kurtis R. (2014) An historical perspective on the wind resistance of clay and concrete roofing tiles. Interface, 32 (11). pp. 22-35
• Holmes, John D., Allsop, Andrew C., and Ginger, John D. (2014) Gust durations, gust factors and gust response factors in wind codes and standards. Wind & Structures, 19 (3). pp. 339-352
• Wang, Vincent Z., and Ginger, John D. (2014) Maximum a posteriori estimation based wind fragility analysis with application to existing linear of hysteretic shear frames. Structural Engineering and Mechanics, 50 (5) pp. 653-664
• Lovisa, Amy C., Wang, Vincent Z., Henderson, David J., and Ginger, John D. (2013) Development and validation of a numerical model for steel roof cladding subject to static uplift loads.  Wind & Structures, 17 (5).  pp. 495-513
• Kim, P.Y., and Ginger, J.D. (2013) Internal pressures in buildings with a dominant opening and background porosity.  Wind & Structures, 16 (1). pp. 47-60
• Henderson, David, Williams, Curtis, Gavanski, Eri, and Kopp, Gregory A. (2013) Failure mechanisms of roof sheathing under fluctuating wind loads. Journal of Wind Engineering and Industrial Aerodynamics, 114. pp. 27-37
• Henderson, David J., Morrison, Murray J., and Kopp, Gregory A. (2013) Response of toe-nailed, roof-to-wall connections to extreme wind loads in a full-scale, timber-framed, hip roof. Engineering Structures, 56 pp. 1474-1483.
• Miller, Craig, Holmes, John, Henderson, David, Ginger, John, and Morrison, Murray (2013) The response of the dines anemometer to guest and comparisons with cup anemometers.  Journal of Atmospheric and Oceanic Technology, 30(7). pp. 1320.1336
• Morrison, Murray J., Henderson David, J., and Kopp, Greggory A. (2012) The response of wood-frame, gable roof to fluctuating wind loads. Engineering Structures, 41.  pp 498-509.
• Wang, Vincent A., Ginger, John D., and Narayan, Krishneel (2012) Intralaminar and interlaminar fracture characterization in glued-laminated timber members using image analysis.  Engineering Fracture Mechanics, 82.  pp. 73-84.
• Holmes, J.D., Kwok, K.C.S., and Ginger J.D. (2012) Wind Loading Handbook for Australia and New Zealand: background to AS/NZS 1170.2 wind actions.  AWES-HB-001-2012.  Australasian Wind Engineering Society, Sydney, NSW, Australia.
• Holmes, J.D., and Ginger J.D. (2012) Internal pressures - The dominant windward opening case: a review.  Journal of Wind Engineering and Industrial Aerodynamics, 100 (1).  pp. 70-76
• Holmes, J.D., and Ginger, J.D. (2012) The gust wind speed duration in AS/NZS 1170.2.  Australian Journal of Structural Engineering, 13 (3).  pp. 207-216
• Kopp, Gregory A., Morrison, Murray J., and Henderson David J. 2012.  Full-scale testing of low-rise, residential buildings with realistic wind loads.  Journal of Wind Engineering and Industrial Aerodynamics, 104-106.  pp. 25.39
• Henderson, D. J., and Ginger, J. D. 2011, Response of pierced fixed corrugated steel roofing systems subjected to wind loads. Engineering Structures, 33 (12).  PP. 3290-3298
• Jayasinghe N.C. and Ginger J.D., Vulnerability of roofing components to wind loads, Wind and Structures Journal, Vol. 14, No. 2 2011, pp 321-335.
• Leitch C., Ginger J., Harper B., Kim P., Jayasinghe N., and Somerville L., Performance of Housing in Brisbane Following Storms on 16 November 2008, Australian Journal of Structural Engineering, Vol. 11, No. 1, 2010, pp 45-62.
• Ginger J.D., Holmes J.D. and Kim P.Y., Variation of internal pressure with varying sizes of dominant opening and volumes, ASCE Journal of Structural Engineering, Vol. 136, No. 10, October 2010, pp 1319-1326.
• Kopp, G.A., Morrison, M.J., Gavanksi, E., Henderson, D. & Hong, H.P., (2010), The ‘Three Little Pigs’ Project: Hurricane Risk Mitigation by Integrated Wind Tunnel and Full-Scale Laboratory Tests, ASCE Natural Hazards Review, Vol. 11, pp. 151-161.
• Henderson, D., Ginger, J., Morrison, M. and Kopp, G.A. (2009), Simulated cyclonic winds for low cycle fatigue loading of roofing. Wind and Structures, Vol 12, 383-400.
• Ginger J. D., Holmes J. D. and Kopp G. A., Effect of building volume and opening size on fluctuating internal pressure, Wind and Structures Journal, Vol. 11, No. 5 2008, 361-376.
• Henderson D. J. and Ginger J. D., Role of building codes and construction standards in windstorm disaster mitigation, The Australian Journal of Emergency Management, Vol. 23, No. 2, 2008, 40-46.
• Ginger J. D., Henderson D. J., Leitch C. J. and Boughton G.N., Tropical Cyclone Larry: Estimation of wind field and assessment of building damage, Australian Journal of Structural Engineering, Vol. 7, No. 3, 2007, 209-224.
• Henderson D. J. and Ginger J. D., Vulnerability model of an Australian high-set house subjected to cyclonic wind loading, Wind and Structures Journal, Vol. 10, No. 3 2007, 269-285.
• Ginger J. D. and Holmes J. D., Design wind loads on gable-ended low-rise buildings with moderate and steep roof slopes, Australian Journal of Structural Engineering, Vol. 6, No. 2, 2005, 89-102.
• Ginger J. D., Fluctuating wind loads across gable-end buildings with a range of roof shapes, Wind and Structures Journal, Vol. 7, No. 6 2004, 359-372.
• Ginger J. D. and Letchford C. W., Peak wind loads under delta wing vortices on canopy roofs, Progress in Wind Engineering, Journal of Wind Engineering and Industrial Aerodynamics (JWEIA) 43, 1992, 1739 - 1750.
• Letchford C. W. and Ginger J. D., Wind loads on planar canopy roofs, Part 1: mean pressure distributions, JWEIA 45, 1992, 25-45.
• Ginger J. D. and Letchford C. W., Characteristics of large pressures in regions of flow separation, JWEIA 49, 1993, 301 - 310.
• Ginger J. D. and Letchford C. W., Wind loads on planar canopy roofs, Part 2: fluctuating pressure distributions and correlations, JWEIA 51, 1994, 353 - 370.
• Ginger J. D. and Letchford C. W., Pressure factors for edge regions on low-rise building roofs, JWEIA 54-55, 1995, 337 - 344.
• Ginger J. D., Mehta K. C. and Yeatts B. B., Internal pressures in a low-rise full-scale building, JWEIA 72, 1997, 163-174.
• Ginger J. D. and Letchford C. W., Net pressures on a low-rise full-scale building, Journal of Wind Engineering and Industrial Aerodynamics Vol. 83, 1999, pp 239-250.
• Reardon G. F., Boughton G., Henderson D. J. and Ginger J. D., The effects of tropical cyclone Vance on Exmouth, The Australian Journal of Emergency Management, EMA-Winter 1999, Vol 14 No. 2, pp 27-30.
• Ginger J. D., Reardon G. F. and Whitbread B. J., Wind load effects and equivalent pressures on low-rise house roofs, Engineering Structures 22, 2000, 638-646.
• Ginger J. D., Internal pressures and cladding net wind loads on a full-scale low-rise building, ASCE Journal of Structural Engineering, April 2000, 538-543.
• Ginger J. D., Characteristics of wind loads on roof cladding and fixings, Wind and Structures Journal, Vol. 4, No. 1, 2001, 73-84.
• Ginger J.D. and Holmes J. D., Effect of building length on wind loads on low-rise buildings with a steep roof pitch, Journal of Wind Engineering and Industrial Aerodynamics Vol 91, pp 1377-1400, Nov 2003.

• Henderson, D.J., Morrison M. J. and Kopp G. A., (2011) Spatially and temporally varying wind loads applied to a full-scale, timber-framed, hip roof, Proc. 13^thInternational Conference on Wind Engineering, Amsterdam.
• Kopp G.A., Morrison M. and Henderson D., (2011) Full scale testing of low-rise buildings using realistically-simulated wind loads, Keynote paper, Proc. 13^thInternational Conference on Wind Engineering, Amsterdam.
• Morrison M., Henderson D., and Kopp G.A., (2011) Response of a Wood-Frame Gable Roof, Under Realistic Fluctuating Wind Loads, Proc. 13^thInternational Conference on Wind Engineering, Amsterdam.
• Miller C., Holmes J., Henderson D., Ginger J., and Morrison M., (2011) The response of the Dines anemometer to turbulent gusting and comparisons with cup anemometers Proc. 13^thInternational Conference on Wind Engineering, Amsterdam.
• Henderson, D. J., and Ginger, J. D. (2010). Fluctuating wind loads for cladding design, Australian Structural Engineering Conference, Melbourne, Australia.
• Henderson, D.J., Morrison M. J., Ginger, J.D. and Miller, C. A., (2010) Response of Dines Anemometer to simulated winds, 14th AWES workshop, Canberra.
• Henderson, D. J., Ginger, J. D., Kopp, G. A., and Morrison, M. J. (2009). Application of simulated cyclonic wind loads on roof cladding, 11^th Americas Conference on Wind Engineering, Puerto Rico.
• Karunasena W. & Leitch C. J. (2008) “Investigation on role and function of noggings in residential timber frame construction”, 20th Australasian Conference on the Mechanics of Structures and Materials (ACMSM20), Toowoomba, Qld, Australia
• Henderson D., Ginger J. and Morrison M., New Australian cyclonic wind induced fatigue loading criteria for roofing, Proc. 6th Australian Structural Engineering Conference (ASEC), Paper No. 042, 2008.
• Henderson D., Ginger J., Berndt C. and Kopp G. A., Fatigue failure of G550 steel building components during wind loading, Proc.6th Australian Structural Engineering Conference (ASEC), Paper No. 043, 2008.
• Ginger J D., Holmes J. D. and Kim P. Y., Effect of volume and size of opening on internal pressure fluctuations, Proc. 12th International Conference on Wind Engineering, Cairns, Australia, July 2007, 2095-2102.
• Ginger J. D., Henderson D. J. and Kim P. Y., Reliability of contemporary house roofs to cyclonic wind loads, Proc. 12th International Conference on Wind Engineering, Cairns, Australia, July 2007, 2071-2078.
• Leitch C. J., Ginger J. D., and Henderson D. J., Vulnerability of metal clad sheds in cyclonic regions, Proc. 12th International Conference on Wind Engineering, Cairns, Australia, July 2007, 2087-2094.
• Henderson D., Ginger J., Leitch C., Boughton G. and Falck D., Tropical Cyclone Larry: Engineering estimates of wind speed and performance of buildings, Proc. 12th International Conference on Wind Engineering, Cairns, Australia, July 2007, 2079-2086.
• Kim Peter, Henderson David and Ginger John, LHL: New Australian test method for wind induced fatigue of building envelope, Proc. 12th International Conference on Wind Engineering, Cairns, Australia, July 2007, 2007-2014.
• Henderson David, Ginger John, and Kopp Gregory, Cyclonic wind induced fatigue of metal roofing systems, Proc. 12th International Conference on Wind Engineering, Cairns, Australia, July 2007, 2367-2374.
• Ginger J. D. and Henderson D. J., Reliability of metal-clad, low-rise, low-pitch roofs subjected to wind loads, 5th Australian, Structural Engineering Conference (ASCE5), September, 2005.
• Henderson D. J. and Ginger J. D., Fatigue failure of roof components subjected to wind loading, 5th Australian, Structural Engineering Conference (ASCE5), September, 2005.
• Ginger J. D. and Letchford C. W., Pressure factors on low-rise building roofs, Proc. 3rd Asia-Pacific Symposium on Wind Engineering, December 1993, Hong Kong, Vol. II, 717-722.
• Letchford C. W. and Ginger J. D., Wind environment assessment : A case study in the Brisbane CBD, Proc. 3rd Asia-Pacific Symposium on Wind Engineering, December 1993, Hong Kong, Vol. II, 973-978.
• Ginger J. D., Yeatts B. B. and Mehta K. C., Internal pressures in a low-rise full scale building, Proc. 9th International Wind Engineering Conference, Jan 1995, India.
• Ginger J. D. and Letchford C. W., Net Pressures on a low-rise full-scale building, 4APSOWE, Gold Coast, July, 1997, 115-118.
• Fernando S. and Ginger J. D., Ground level wind effects due to common architectural shapes, 4APSOWE, Gold Coast, July, 1997, 359-362.
• Ginger J. D., Reardon G. F. and Langtree B. A., Wind loads on fences and hoardings, Proc. ASEC, Auckland, October, 1998 Vol. 2, 983-990.
• Ginger J. D., Reardon G. F. and Whitbread B. J., Wind loads on roof trusses, Proc. ASEC, Auckland, October, 1998 Vol. 2, 991-997.
• Ginger J. D., Fluctuating wind loads on roof components, Proc. 10th International Conference on Wind Engineering, Denmark, June, 1999, 1125-1130.
• Reardon G. F., Henderson D. J. and Ginger J. D., Effects of cyclone Vance on the strength of houses in Exmouth WA, Proc. of the Australian Disaster Conference, Canberra, 1999, 47-52.
• Ginger J. D., Wind induced pressures and airflow through buildings, Proc. 7th Australasian Heat and Mass Transfer Conference, James Cook Uni., Townsville, July 2000, 137-143.
• Ginger J. D. and Holmes J. D., Wind loads on long low-rise buildings, Proc. 5th Asia-Pacific Conference on Wind Engineering, Kyoto, Japan, October 2001, 529-532.
• Ginger J. D., Wind loads and response of grandstand roofs, Proc. 11th International Conference on Wind Engineering, Lubbock, Texas, USA, June 2003, 1603-1610.
• Ginger J. D., Fluctuating wind pressures across gable-end buildings, Proc. 11th International Conference on Wind Engineering, Lubbock, Texas, USA, June 2003, 1213-1220.
• John Ginger, Cam Leitch, David Henderson and Chris Reitano.(2004) "Flying Debris Impact in Windstorms”, pp225-230, ICBEST 2004 International Conference on Building Envelope Systems and Technology, Sydney, Australia.

• Satheeskumar, N., Henderson, D.J., Ginger, J.D., and Wang C.H., (2015) Load sharing and structural response of timber-framed house. Proceedings of the Second International Conference on Performance-based and Life cycle Structural Engineering, pp. 810-819. PLSE 2015: Second International Conference on Performance-based and Life-cycle Structural Engineering, 9-11 December 2015, Brisbane QLD, Australia
• Smith, Daniel J., Henderson, David J., and Terza, Lucy M. (2015) Modelling cyclone loss mitigation using claims analysis. Proceedings of the Second International Conference on Performance-based and Life cycle Structural Engineering, pp. 833-841. PLSE 2015: Second International Conference on Performance-based and Life-cycle Structural Engineering, 9-11 December 2015, Brisbane QLD, Australia
• Parackal, K.I., Mason, M., Henderson, D.J., Smith, D.J., and Ginger J.D. (2015) Investigations of damage: Brisbane 27 November 2014 severe storm event. Research Proceedings from the Bushfire and Natural Hazards CRC & AFAC Conference. pp 240-248.  AFAC 2015: Australasian Fire and Emergency Service Authorities Council Conference, 1-3 September 2015, Adelaide, AS, Australia.
• Satheeskumar, N., Henderson, D.J., and Ginger (2015) Wind loading effects on roof to wall connection in a timber frame structure. Proceedings of the 14th International Conference on Wind Engineering, pp 1-11.  ICWE 2015: 14th International Conference on Wind Engineering, 12-26 June 2015, Porto Alegre, Brazil.
• Parackal, K.I., Humphreys, M.T., Ginger, J.D., and Henderson, D.J (2015) Wind Loads on contemporary Australian housing. Presentations from the 17th Australasian Wind Engineering Society Workshop.  pp. 1-4.  AWES 2015: 17th Australasian Wind Engineering Society Workshop, 12-13 February 2015, Wellington, New Zealand.
• Satheeskumar, N., Henderson, D., Ginger, J., and Wng, D.H. (2015) Loading effects on timber truss to wall connection in a contemporary house. Presentations from the 17th Australasian Wind Engineering Society Workshop.  pp. 1-4.  AWES 2015: 17th Australasian Wind Engineering Society Workshop, 12-13 February 2015, Wellington, New Zealand.
• Wang, Vincent Z., Ginger, John D., and Henderson,, David J. (2013) Evaluation of wind fragilities of existing multi-story shear frames using maximum a posteriori estimation. Proceedings of the 2013 world Congress on Advances in Structural Engineering and Mechanics, pp. 2816-2823 ASEM 2013: Wold Congress on Advances in Structural Engineering and Mechanics, 8-12 September 2013, Jeju, South Korea.
• Wang, Vincent Z., Ginger, John D., and Henderson,, David J. (2013) A surrogate model for a type of nonlinear hysteretic system with application to wind response analysis. Proceedings of the 2013 world Congress on Advances in Structural Engineering and Mechanics, pp. 2816-2823 ASEM 2013: Wold Congress on Advances in Structural Engineering and Mechanics, 8-12 September 2013, Jeju, South Korea.
• King, David, Ginger, John, Williams, Stewart, Cottrell, Alison, Gurtner, Yetta, Leitch, Cam, Henderson, David, Jayasinghe, Nandana, Kim, Peter, Booth, Kate, Wein, Carl, Innes, Kenneth, Jacobs, Keith, Jago-Bassingthwaighte, Marianne, and Jackson, Luke (2013) Planning, Building and Insuring: adaptation of built environment to climate change induced increased intensity of natural hazards.  National Climate Change Adaptation Research Facility, Gold Coast, QLD, Australia.
• Kopp, Gregory A., Khan, Mohammad Abrar Alam, Henderson, David J., and Morrison, Murray J. (2013) Analysis of wood-frames roof failures under realistic hurricane wind loads. Proceedings of the 2012 ATC and SEI Conference on Advances in Hurricane Engineering Advances in hurricane Engineering: Learning from our past (1), pp. 1078-1089.  2012 ATC and SEI Conference on Advances in Hurricane Engineering 24-26 October 2012, Miami, FL, USA.
• Henderson, David, Mason, Matthew, and Ginger, John (2013) SWIRLnet: portable anemometer network for wind speed measurements of land-falling tropical cyclones.  Proceedings for the 12th Americas Conference on Wind Engineering (3) pp. 1349-1356. 12ACWE: 12th Americas Conference on Wind Engineering: Wind effects on structures, communities and energy generation, 16-20 June 2013, Seattle, WA USA.
• Jayasignhe, N.C., Ginger, J.D., Henderson, D.J., and Walker, G.R. (2012) Distribution of wind leads in roofing connections. Australasian Structural Engineering Conference Proceedings, pp. 1-8.  Australasian Structural Engineering Conference 2012 (ASEC12), 11-13 July 2012, Perth, WA, Australia.
• Boughton, G.N., Henderson, D.J., Leitch, D.J., and Ginger, J.D. (2012) Structural lessons for  housing from TC Yasi February 2011.  Australasian Structural Engineering Conference Proceedings, pp 1-8.  Australasian Structural Engineering Conference 2012 (ASEC12), 11-13 July 2012, Perth WA, Australia.
• Lovisa, A.C., Wang, V.C., Henderson, D.J., and Ginger, J.D. (2012)  A finite element model for pierced-fixed, corrugated metal roof cladding subject to uplift wind loads.  Australasian Structural Engineering Conference Proceedings, pp. 1-8.  Australasian Structural Engineering Conference 2012 (ASEC12), 11-13 July 2012, Perth, WA, Australia.
• Boughton, Geoff and Henderson, David, (2012)  Tropical cyclone Yasi - load testing for timber houses on a large scale.  Proceedings of the World Conference on Timber Engineering (2), pp 460-468.  World Conference on Timber Engineering 2012: Strength and Serviceability - Extreme Events, WCTE 2012, 15-19 July, Auckland, NZL

• Kepert Jeffrey, Harper Bruce and Ginger John, Wind speed time averaging conversions for tropical cyclone conditions, AMS 28th Conference on Hurricanes and Tropical Meteorology, Orlando, FL, April-May, 2008.
• Ginger J. D. Henderson D. J. and Leitch, C. J., Vulnerability of metal-clad, low-rise, low-pitch sheds subjected to wind loads, 12th AWES workshop, Queenstown, February, 2005.
• Leitch, C. J., Ginger J. D. and Henderson D. J., Survey of metal-clad, low-rise, low-pitch sheds in cyclonic regions, 12th AWES workshop, Queenstown, February, 2005.
• Ginger J. D. and Henderson D., Fatigue failure of roof components subjected to wind loading, Proc. 10th Americas Conference on Wind Engineering. Baton Rouge, USA, June 2005
• Henderson D, and Ginger J. D., Modelling the reliability of a high set house subjected to cyclonic wind loading, Proc. 10th Americas Conference on Wind Engineering. Baton Rouge, USA, June 2005
• Henderson D. and Ginger J., Performance of roof cladding and battens subjected to wind loads, 13th AWES workshop, Darwin, June, 2004.
• Ginger J. and Harper B., Wind velocity field at Cape Moreton, 13th AWES workshop, Darwin, June, 2004.
• Ginger J. D., Wind loads on canopy roofs, 1st Australian Wind Engineering Society (AWES) workshop, January 1991, Hunter Valley, NSW, Australia.
• Ginger J. D. and Letchford C. W., Wind loads on roofs in regions of flow separation, 2nd AWES workshop, February 1992, Monash University, Vic., Australia.
• Ginger J. D. and Letchford C. W., Pressure factors for regions of large pressures on low-rise building roofs, 3rd AWES workshop, July 1993, Uni. of Qld, Australia.
• Letchford C. W. and Ginger J. D., Full scale wind speeds in an inner city, 3rd AWES workshop, July 1993, Uni. of Qld, Australia.
• Ginger J. D., Yeatts B. B. and Mehta K. C., Internal pressures in a low-rise full scale building, 4th AWES workshop, October 1994, Sydney, Australia.
• Ginger J. D. and Yeatts B. B. Performance of Pressure Equalised Rainscreen (PER) facades : A field study , 4th AWES workshop, October 1994, Sydney, Australia.
• Ginger J. D. and Fernando S., Measured and Predicted Dispersions from Point Sources, 5th AWES workshop, February 1996, South Australia.
• Ginger J. D., Fluctuating wind loads on roof cladding fasteners and batten-truss connections, 7th AWES workshop, Auckland, September, 1998.
• Ginger J. D. and Hughes J., Natural ventilation of houses, 7th AWES workshop, Auckland, September, 1998.
• Ginger J. D., Fluctuating wind loads on roof cladding fasteners and batten-truss connections, 7th AWES workshop, Auckland, September, 1998.
• Ginger J. D., Hutton, C. and Reardon G. F., Wind loads on large buildings with steep roofs, 8th AWES workshop, Perth, February, 2000.
• Ginger J. D., Kane, R. and Henderson D.J., Wind loads on hip end roofs, 8th AWES workshop, Perth, February, 2000.
• Ginger J. D., Holmes J. D. and Maltby A., Wind load effects and effective static loads on canopy roofs, 9th AWES workshop, Townsville, July, 2001.
• Ginger J. D., Holmes J. D. and Rodgers H., Wind loads on large industrial-type buildings, 9th AWES workshop, Townsville, July, 2001.
• Henderson D. J., Reardon G. F. and GINGER J. D., Performance of light gauge metal roof cladding subjected to cyclonic wind loading- A review, 9th AWES workshop, Townsville, July, 2001.
• Ginger J. D., Scovell A., Olsen R. and Clarke P., Wind loads on a large storage shed, 10th AWES workshop, Sydney, February, 2003.
• Ginger J. D. and Henderson D. J., Wind loading roof cladding and fixings, 10th AWES workshop, Sydney, February, 2003.

Technical Notes

• Technical Note 1 (PDF, 92 KB) - General Requirements
• Technical Note 2  (PDF, 107 KB)- Wind Load Testing
• Technical Note 3 (PDF, 92 KB) - Concentrated Load Testing
• Technical Note 4 (PDF, 768 KB) - Windborne Debris Impact Testing
• Technical Note 5 (PDF, 311 KB) - Wind Load Testing of Photo Voltaic Solar Panel Systems
• Technical Note 6 (PDF, 609 KB) - Garage Doors and Other Large Access Doors

Technical Reports and Alerts

• 2017 CTS Tech Bulletin TC Debbie (PDF, 512 KB)
• 2016 Restraints for Internal Partition walls (PDF, 89 KB)
• 2016 Conformity of treaded cyclone rods (PDF, 98 KB)
• 2011 CTS Tech Alert Garage Doors (PDF, 165 KB)
• 2011 Solar Panels on Roofs report (PDF, 3876 KB)
• 2009 CTS Tech Alert Fixings of Window Frames (PDF, 106 KB)

Search our complete list of Technical reports

• CTS Information Bulletin 2010: Roller and Sectional Doors (PDF, 510 KB)
• CTS Information Bulletin 2004: Roof Battens (PDF, 132 KB)

• December 2004 (PDF, 318 KB)
• October 2005 (PDF, 474 KB)
• October 2006 (PDF, 146 KB)
• December 2007 (PDF, 238 KB)
• September 2009 (PDF, 260 KB)
• Summer 2010 (PDF, 531 KB)
• Summer 2011
• October 2012 (PDF, 355 KB)
• December 2015 (PDF, 905 KB)
• May 2016 (PDF, 680 KB)