AMX 5-button control

Media Switch and volume control

Rooms A1-013A A1-013B A4-008 2-102 2-104 25-005 25-006 25-007 25-008

amx 5button

Show media on flat panel display

Select the media to be used for the presentation by pressing the corresponding button on the panel. If a laptop is connected the laptop will be shown when selecting PC on the media switch.

Oncea button is pressed , the red light in top left corner of the button lights up and a command is sent to the projector or flat panel display, to accept the incoming signal from the selected media.

To connect a laptop to the AV system, plug in the VGA and 3.5mm cables, set the laptop display to duplicate  (mirror display, not extended) and press the PC button on the media switch.

Connect Laptop

To connect a laptop to the AV system, plug in the VGA lead, duplicate the laptop display and press the PC button on the control.


The volume of the speakers is controlled by the buttons below the ‘Volume’ label on the media selector.

Make sure the Dell PC or laptop audio is not muted and turned up if the presentation contains an audio component. The computer volume control is by way of an icon on the taskbar at the bottom right of your screen. Hovering over the speaker icon will show you the volume as a percentage of maximum volume. Click on the icon to adjust the volume

Win7Speaker2_25x25.gif = 100% Win7Speaker2_25x25_muted.gif= 0%

Please remember to press the Off button before leaving the room, unless of course the next lecturer/presenter is already present.