AMX 6-button Control (b)

VAVS Home Help AMX 6-button Control (b)

amx_6button_ctrl_vert_volbottomR.jpg

Select the appliance you intend to use on the panel above. Once you press a button, a red light on the top left of the button lights up and a command is sent to the projector to accept the incoming signals from the appliance you selected.

Please note it may take a few minutes for the projector to warm up, so please desist from pressing buttons in quick succession if nothing happens immediately.

If you press the OFF button after pressing an appliance button you will delay matters even further. If there is no image on the projector screen after 5 minutes, please contact Audio Visual Services. After finishing your presentation, please press the OFF button unless of course there is another presentation to follow immediately after yours.

Please also note the projector is set to automatically turn off after 3 hours of continuous use of the same appliance. To reset the timer, briefly change appliance before continuing (i.e change from PC to Video and back to PC) as you otherwise might be in the middle of a presentation and the 3 hour limit is reached and the equipment automatically switches off.

Volume is controlled by the Volume Up and Volume Down button. There is also a volume control on one of the wall mounted speakers . Make sure the audio is not muted on the PC if you are playing media through the computer.