VC System 4-006 C90 2xProjectors local

VAVS Home Help VC System 4-006 C90 2xProjectors local

Local presentation

4-006

This room is fitted with two lampless projectors and a wall mounted monitor. Press the On button on the control (located on the presenter's desk) to turn them on and lower the motorized screens. The screens can be lowered or raised individually if required.

projector control

Activate the system

The interacting hardware between you and the Cisco C90 is the Tandberg remote control, usually located on the presenter's desk. Pick up the remote to activate the system.The projector screens and monitor will display the videoconference splash screen.The monitor may also show a menu in the bottom left corner. Press the pan left button to remove it. Point the remote towards a camera before pressing a button.

The action of the 5 buttons along the top of the remote corresponds to the labelled tabs visible along the bottom of the monitor.

camera angle trc5 remote

Show a Dell PC

To add a PC presentation, briefly press the switch to pc Switch to PC button. The PC will be shown on the projector screen closest to the presenter's desk.

Show a laptop

Connect the laptop to the AV system using the

Duplicate (clone or mirror) the laptop display and momentarily press the switch to pc Switch to PC button

Show document camera

To show what is on the document camera, press and hold the switch to pc Switch to PC button until a presentation source pop-up window appears at the bottom left hand corner of the flat panel display. Select Doc Cam and press OK.

To stop presentation

Briefly press the switch to pc Switch to PC button