VAVS Home Help VC System C40 1xPanel Local

VC System C40 1xPanel local

Local presentation

A2-201 B1-102 E1-112 1-203

The interacting hardware between you and the Cisco C40 is the Tandberg remote control, (see image below to the right) usually located somewhere on the meeting room table. Click on the image of the remlote for a user guide. Point the remote towards the camera before pressing a button.

Pick up the remote control to wake the system from its slumber. The image shown below to the left, will appear on the flat panel display.

trc5 remote

If a menu appears at the bottom left hand corner of the screen, press the left arrow key to close it.

Show a Dell PC presentation

To add a PC presentation to the videoconference, briefly press the switch to pc Switch to PC button.

Show a laptop presentation

Connect the laptop to the AV system using the

Duplicate (clone or mirror) tha laptop display and momentarily press the switch to pc Switch to PC button

Show document camera/visualiser presentation

To show what is on the document camera/visualiser, press and hold the switch to pc Switch to PC button until a presentation source pop-up window appears at the bottom left hand corner of the flat panel display. Select Doc Cam and press OK.

Turn off presentation

Briefly press the switch to pcSwitch to PC button.