VC System C90 2xProjectors local

VAVS Home Help VC System C90 2xProjectors local

Local presentation

A1-129 A21-001 A21-002 9-001 9-002

Projector and flat panel display on/off control

panasonic proj control

Tandberg Remotetrc5 remote

Turn the projectors and comfort monitor ON by pressing the On button on the AMX control (shown above)

The interacting hardware, between you and the Cisco C90 Videoconference system, is the Tandberg remote control, (shown above right) usually located on the presenter's desk. Pick up the remote control to wake the system from its slumber.

The projector screens will show the videoconference splash image shown below

custom splash

The wall mounted flat panel display will display the videoconference splash screen (shown below). The current camera angle is shown in a small image at the bottom right of the monitor. To close it, press the Exit button (top far right on the remote).

vc splash

Show a Dell PC presentation

To show a PC presentation, briefly press the switch to pc Switch to PC button. The PC will be shown on the projector screen closest to the presenter's desk.

Show a laptop presentation

Connect the laptop to the AV system using the

Duplicate (clone or mirror) tha laptop display and momentarily press the switch to pc Switch to PC button

Show document camera/visualiser presentation

To show what is on the document camera/visualiser, press and hold the switch to pc Switch to PC button until a presentation source pop-up window appears at the bottom left hand corner of the flat panel display. Select Doc Cam and press OK.

Turn off presentation

Briefly press the switch to pc Switch to PC button.