d1-022c vc mode

Hover the mouse over the tabs and buttons for a description.

Tabs and buttons with descriptions commencing with ‘GOTO’ can be clicked to simulate touch panel action.

D1-022C Touch panel simulator GOTO Show a closeup of the patient Touch to unmute/mute the microphone Touch to change the conference picture layout Touch to show the current camera angle Touch to disconnect a video call Touch to open the phone book and connect a call manually Touch to connect a video call manually Touch and slide to increase the videoconference volume Touch and slide to reduce the videoconference volume GOTO Turn off the AV system Touch and slide to adjust the desktop PC playback volume GOTO Show desktop PC Videoconference mode selected

Videoconference mode

The master chair has been fitted with a videoconference system with a camera mounted on a moveable arm.

Videoconference connections are usually scheduled by VAVS but facilities to connect video calls manually are available as follows:

  • Connect a call manually be entering the dial in sequence (H.323 or SIP)
  • Connect a call manually by opening the phone book

The volume from the far end participants can be adjusted by touching the speaker down/speaker up buttons.

Once the video call has been established, the far end participant(s) will be shown. To show a patient in the master chair, adjust the camera on the moveable arm and touch the Show Camera button