VAVS Home E2-113 TP vc mode

E2-113 TP vc mode

Hover the mouse over the tabs and buttons for a description.

Tabs and buttons with descriptions commencing with ‘GOTO’ can be clicked to simulate touch panel action.

Touch panel simulator Touch to select the document camera as the VC Main Image Touch to select the laptop as the VC Main Image Touch to select the desktop PC as the VC Main Image Touch to select the audience camera as the VC Main Image GOTO View far end on the touch panel Touch to change conference layoutTouch to view the current camera angle in a small window on the projector screen Touch to mute microphone GOTO Exit videoconference mode GOTO Audio/volume control GOTO Videoconference controls VC Main Image tab selected Presenter camera selected as the vc main image GOTO Select a media source for the presentation Camera controls

Videoconference mode
VC Main Image - Presenter camera

In videoconference mode the system is capable of sending two concurrent streams to the connected room(s):

  1. the presenter (video/audio of the presenter)
  2. the presentation (video/audio of the presentation)

The presenter

The presenter must be visible to the far end participants at all times, hence adjusting the presenter camera to the anticipated movements is important.  Touch the Camera controls (presets, pan tilt and zoom) to change the camera settings. The current camera angle will be shown on the touch panel. A lectern microphone is provided but does restrict the movement of the presenter. Wireless microphones are available to allow for a freer range.

The presentation

Under normal circumstances you would as the presenter use the presenter camera as the main videoconference image (video stream) and select a media source from the VC presentation tab as the presentation image (video stream).

Audience camera

The audience camera is used to show the audience to the far end room(s) and generally set by VAVS.
The other media options are generally only used as a VC Presentation and not the VC Main Image.