Where Australian homes are put to the test

Researchers at JCU's Cyclone Testing Station. Credit: Budd Photography.

When Cyclone Tracy devastated Darwin in 1974, most people thought it was impossible to design houses to withstand these extreme events. Researchers from JCU saw it differently.

They noticed that engineered structures like hospitals and big hotels had mostly survived. In a JCU-led report for the Commonwealth Government, they recommended houses in cyclone regions be engineered for wind as rigorously as larger buildings. To see this recommendation through, a testing facility was required.

JCU’s Cyclone Testing Station (the Station) was established in November 1977 to meet this demand – and has been shaping how Australia builds to withstand cyclones ever since.

Rewriting the rules of house design in cyclone-prone areas

David Henderson, the Station’s Research Director and Chief Engineer, has worked there since 1991. He says the problem with houses built prior to the 1980s is simple.

“One of the reasons houses suffered so badly is that they were built to hold the roof up, not tie the roof to the ground,” he says.

Together with CSIRO and state government building departments, JCU researchers helped establish design rules for houses in cyclone-prone areas. State building codes were updated in response, which led to every part of a house being fastened together with screws, steel straps and bolts instead of plain nails, so the wind couldn’t peel off a roof one weak attachment at a time.

In the 1980s, the station was one of the first places in the world to test full-scale structures, using a steel frame and hydraulic rams to apply repeated loads to a house built on a test pad.

“This method was fundamental in investigating how safe our houses were, because we could load up the real wind paths and test different approaches,” Henderson says.

Testing wind speed at JCU's Cyclone Testing Station. Credit: Budd Photography

From survival to resilience

The updated building codes worked. In cyclone after cyclone, from Winifred in 1986 onwards, the station’s damage surveys found that houses built to the new standards performed far better than older homes.

After Cyclone Yasi in 2011, fewer than three per cent of post-1980s houses in the worst-hit areas had significant roof damage, compared with more than 12 per cent of older homes.

The station’s researchers turned their attention to resilience: engineering houses that don’t just keep people alive in a cyclone, but come through it with less damage, avoiding the need for residents to move out while costly rebuilding takes place.

Dr Juan Ignacio Zaracho is a Research Fellow who is part of this shift, contributing to research on building vulnerability and resilience to cyclones, severe thunderstorms and other natural hazards.

Henderson says the building code was never designed with resilience in mind.

“The National Construction Code is really about life safety when it comes to structures,” Henderson says. “It’s not about functionality, resilience or saving money.”

He highlights wind-driven rain as a major issue in today’s cyclones and storms.

“Our codes and standards assume rain falls straight down with gravity,” Henderson says. “It doesn’t – as soon as the wind blows, the rain is going sideways.

“It’s a really big driver of loss in insurance payouts.”

He cites Tropical Cyclone Alfred, which hit South-East Queensland and northern New South Wales in 2025. While its wind speeds were well below the design capacity of the region, wind-driven rain resulted in one of the largest insurance payouts for building damage in recent years.

The Station is working with product manufacturers, designers and insurers to develop better performance criteria and improve housing resilience.

The real challenge is doing so with only a minimal increase in cost.

“We can design for better energy efficiency, and better protection from heat, water ingress and wind load,” Henderson says.

“We can demonstrate that a better-designed house costs less over its lifetime, through savings on insurance payouts, materials, and ongoing costs – but there is a slightly higher cost upfront.”

Safer homes take a whole community

In an era where the focus is on affordable housing, knowing what makes a house resilient is only half the job. The other half is engaging with people to act on it, and for that, the Station works with JCU’s psychology researchers.

Their research found that cheaper insurance premiums, which people say would motivate them to retrofit, may not actually be the strongest driver.

Instead, people were more likely to act if neighbours had undertaken the work already or if the steps to mitigate damage were simple and straightforward.

Senior Engineer Simon Ingham leads the Station’s commercial product testing for industry, contributing engineering expertise to its research, testing and industry-focused activities in wind and cyclone resilience.

He says perceptions of previous cyclones also play a role - surviving a cyclone can give people a false sense of security if they overestimate the winds they experienced.

“We found you need to help people understand their actual exposure, alongside practical advice that encourages preparation rather than leaving them overwhelmed,” he says.

“It takes all of us, from the regulation side to the product side to the designers and builders to the homeowners and landlords, to actually make a community more resilient.”

A house which lost its enclosed veranda during ex-Tropical Cyclone Alfred. Credit: JCU Cyclone Testing Station

The cyclone chasers

Accredited by the National Association of Testing Authorities (NATA), the station allows companies to test building products against Australian standards.

A simulated cyclone subjects roofs, roller doors and walls with windows to pressure and wind loads for up to 10,000 cycles over six hours, and can also recreate the impacts of flying debris, hail and wind-driven rain.

The wind tunnel – complete with a fan measuring 2.5m in diameter – tests models of buildings, then the engineers scale the measurements to actual size to know what loads the real buildings must survive.

The team’s work isn’t limited to the facility.

When a cyclone or severe storm approaches, station engineers race to set up portable towers that are 3.5m high and secured with large ground screws.

As the cyclone hits, the towers record wind speed and direction, temperature, humidity and pressure.

Ingham says these are placed – with local council permission – in locations such as parks surrounded by houses.

“We’re trying to capture the gustiness, the turbulence and the impact of the wind at single-storey height,” he says.

Afterwards, station engineers survey the damage and compare it to the measurements.

“It’s like a forensic analysis of a town – whether the houses and other buildings weathered the storm with minimal or significant damage, you want to know why,” Henderson says.

After the station's investigation of Cyclone Seroja in 2021 linked most of the severe damage in Kalbarri to internal pressure, Western Australia changed its building requirements for the affected region 600km north of Perth.

With the potential for cyclones to reach further south more often, the station has recommended the same changes for houses in South-East Queensland, which sits at a similar latitude to Kalbarri.

The future of resilient housing

Even after nearly five decades of existence, there is still more for the Cyclone Testing Station to do.

Changes to where cyclones are occurring, more complex house designs, and the increased use of imported products are keeping station researchers busy.

Ingham says the focus hasn’t changed since 1977, but it has expanded.

“Our focus is still safer communities for severe weather all around the country and the Pacific, but it's also safer, more resilient, more affordable houses,” he says.

Discover JCU

Research that delivers real-world impact in the Tropics and beyond.